CNC alloy adjustable levers set Royal Enfield Interceptor/Continental 650/Himalayan Euro 5
Code: HL1650B
Brand:
Availability: In stock


Pair of brake and clutch levers made from 6061-T6 aluminum (aircraft quality), black anodized and complete with the Royal Enfield logo, adjustable in 6 positions for:
- Continental GT650, Interceptor 650, (until 2022 without Led headlight and adjustable levers)
- Himalayan 400 (Euro 5 versions only), Scram 411
Fitting the brake lever:
Remove the screw that holds the original lever, then remove the lever. Lightly grease the pivot screw, then install the new lever to replace it. Be careful to leave some "play" between the lever and the piston (when the brake fluid overheats it expands slightly). Tighten the screw and check the operation of the brake light.
Fitting the clutch lever:
Important: it is very easy to damage the clutch sensor by changing the lever, it is highly recommended to remove the switch before the operation below to avoid this risk. Remove the screw of the pin that holds the original lever, then remove the lever without forcing. Loosen the clutch cable adjustment as far as it will go, then unscrew the cable from its guide. Lightly grease the pivot screw, then install the new lever to replace it. Tighten the screw. Adjust the cable tension.
the email will not be published.