Royal Enfield Interceptor 650/Super Meteor/Shotgun 650/Classic/Meteor/HNTR 350 adjustable levers
Code: HL1650C
Brand: Gallimoto
Availability: out of stock, available soon
Pair of brake and clutch levers made from 6061-T6 aluminum (aircraft quality), black anodized and complete with the Royal Enfield logo, adjustable in 6 positions for:
- Continental GT650, Interceptor 650, (from 2023 with adjustable levers and Led headlight only)
- Super Meteor 650
- Shotgun 650
- Meteor 350
- HNTR 350
- Classic 350
Fitting the brake lever:
Remove the screw that holds the original lever, then remove the lever. Lightly grease the pivot screw, then install the new lever to replace it. Be careful to leave some "play" between the lever and the piston (when the brake fluid overheats it expands slightly). Tighten the screw and check the operation of the brake light.
Fitting the clutch lever:
Important: it is very easy to damage the clutch sensor by changing the lever, it is highly recommended to remove the switch before the operation below to avoid this risk. Remove the screw of the pin that holds the original lever, then remove the lever without forcing. Loosen the clutch cable adjustment as far as it will go, then unscrew the cable from its guide. Lightly grease the pivot screw, then install the new lever to replace it. Tighten the screw. Adjust the cable tension.
the email will not be published.